Zorb-It-Up! Liquid to Solid Tips & Advice

Zorb-It-Up! Liquid to Solid Material Safety Data Sheet (MSDS)

Directions for Zorb-It-Up! Liquid to Solid 226g (powder)

1. Sprinkle generously over the entire wet area.

2. For full absorption, allow 5 minutes.

3. Once the spill has been fully absorbed, scoop up the absorbent crystals and dispose of properly in a waste receptacle. Use a broom, brush or wet vaccum to remove any residue. Do not use a dry vacumm for removal as the moisture may damage the machine.

4. Zorb-It-Up! is not a stain remover. Follow treatment with Urine Off, Blood Remover, Wine Off, Coffee Off or other cleaning product as required.

CAUTION: Keep out of reach of children.

FIRST AID: Skin - rinse well with soap and water. Eyes - flood with water for 15 minutes. If irritation develops, contact physician. Ingestion - drink large quantity of milk. Contact physician. Inhalation - if symptoms of overexposure are experienced, evacuate to fresh air. Consult physician if any symptoms persist.

Directions for Zorb-It-Up! Liquid to Solid Amazing Absorbent Sheets

Instructions

1. Place a sheet printed side up on the liquid

2. Weigh down or step on the sheet to ensure contact

3. Allow 15 minutes for maximum absorption

4. Dispose of sheet in the rubbish bin - do not flush in the toilet